CEStronics OMEGA ACTIVE IES Fitting And Operating Instructions page 45

Next drill the holes for the IES into the door.
8.
Fig. 24 - Place the drilling
template
9.
Fig. 25 - Mark the holes
10.
Fig. 26 - Remove the lock
OMEGA ACTIVE IES
Place the supplied

drilling template over
the spindle.
Align the template

accurately.
Ensure parallel

alignment of the
measuring scale on
the template.
Mark the holes for the

fixing screws with an
awl on both sides of
the door.
Remove the lock.

Page 45 of 128
Fitting