Table of Contents
Advertisement
Fitting
6.1.3
Information on push bar installation
Risk of injury!
In case of malfunctions, people may not be able
to open the door in emergencies and may be
injured or killed.
The door thickness must be at least 39 mm and
no more than 100 mm.
The extension kit, optional feature, must be used
on a door thickness from 65 mm.
The push bar is only available with a 9 mm bolt. Your lock
must, therefore, be fitted with a 9 mm hub.
Fig. 12 - 15 mm projection
Page 36 of 128
WARNING
Only use mortise locks with panic function
that have been approved and examined for
this push bar.
Trim the bolt to a projection of
15 mm (measured from the
interior door leaf).
OMEGA ACTIVE IES
Advertisement
Table of Contents
