CEStronics OMEGA ACTIVE IES Fitting And Operating Instructions page 79

5.
Fig. 101 - Insert the coupling unit
6.
Fig. 102 - Insert the bottom end
NOTICE

Malfunctions may occur if the coupling unit is not
fitted properly and/or the tabs are bent!
Be sure that the tabs are not bend.

Be sure that the coupling unit is placed firmly and

flush in the outside shield.
Be sure that both silicone bearings are fitted

properly.
OMEGA ACTIVE IES
Insert the coupling

unit with the upper
end tilted into the
outside shield.
Make sure that the

upper silicone
bearing is inside
the tab.
Now insert the

bottom end of the
coupling unit into
the outside shield.
Use a suitable

screwdriver to
position the
bottom silicone
bearing into the
tab.
Page 79 of 128
Fitting