CEStronics OMEGA ACTIVE IES Fitting And Operating Instructions page 67

6.
Fig. 75 - Insert the coupling unit
7.
Fig. 76 - Insert the bottom end
NOTICE

Malfunctions may occur if the coupling unit is not
fitted properly and/or the tabs are bent!
Be sure that the tabs are not bend.

Be sure that the coupling unit is placed firmly and

flush in the outside shield.
Be sure that both silicone bearings are fitted

properly.
OMEGA ACTIVE IES
Insert the coupling

unit with the upper
end tilted into the
outside shield.
Make sure that the

upper silicone
bearing is inside the
tab.
Now insert the

bottom end of the
coupling unit into the
outside shield.
Use a suitable

screwdriver to
position the bottom
silicone bearing into
the tab.
Page 67 of 128
Fitting