CEStronics OMEGA ACTIVE IES Fitting And Operating Instructions page 83

14.
Fig. 111 - Mount the mechanism
15.
Fig. 112 - Tighten mechanism
16.
Fig. 113 - Screw the outside and
inside plates onto the door
OMEGA ACTIVE IES
Mount the crossbar

mechanism on the
spacer using the
M4 × 6 mm screw.
Insert the two M5

fastening screws.
Use the grommet

supplied for the lower
screw.
Insert the crossbar

mechanism on the
inside of the door
through the bore
holes on the right
side.
Screw the crossbar

mechanism on the
inside onto the
fastening plate on the
outside.
Afterwards fit the

shield to the fastening
plate.
Page 83 of 128
Fitting