Table of Contents
Advertisement
NOTICE
If the ESD cover (3) is removed, this may
cause malfunctions of and/or damage to
the IES.
Do not remove the ESD cover of the electronic
unit (3).
25.
Fig. 122 - Insert the two batteries
NOTICE
Malfunctions and/or damage may occur if the
batteries are not inserted correctly or if wrong
batteries are used!
Be sure to insert the batteries with the correct
polarity.
Be sure to use only batteries of the size AA, 3.6 V, 2.2
Ah, lithium, type ER14505M.
OMEGA ACTIVE IES
Insert the two batteries
size AA,
3.6 V.
Note the correct
position of the battery
poles.
The correct polarity is
located in the battery
compartment.
Page 87 of 128
Fitting
Advertisement
Table of Contents
