Table of Contents
Advertisement
passive locking media and existing OMEGA 125 kHz series
media as an alternative to OMEGA ACTIVE media.
The IES responds to various events during programming,
operation and maintenance with different visual and acoustic
signals.
The IES can be programmed manually with the appropriate
transponder cards (SYSTEM-MASTER, PROGRAM-MASTER,
optional Master cards, see page 27, Chapter "Optional Master
media").
In addition, wireless programming is possible so that virtually
no time is lost by going to the individual devices for manual
programming. Online programming is performed quickly via
installed Access Points. Online programming is significantly
more convenient and clearer.
A wireless system always comprises a PC, the
OMEGA ACTIVE software and a number of Access
Points for data exchange as well as at least one
locking device.
The IES can also be programmed using the optional RF-Stick.
For this purpose, you will require a Windows™ PC (such as a
netbook with installed OMEGA software) and the optional RF-
Stick available from CES. This will allow you to program the
IES at its place of installation (see also page 17, "Programming
with OMEGA software").
For further information, please refer to the
programming instructions for the OMEGA ACTIVE
system which are available free of charge at
www.ces.eu.
OMEGA ACTIVE IES
Introduction
Page 15 of 128
Advertisement
Table of Contents
