Table of Contents
Advertisement
Emergency opening
2.
Fig. 140 – Connect the IES
The three-pole socket in the outside shield offers reverse
voltage protection, so the plug of the Emergency Power
Supply can only be inserted with the correct polarity.
3.
Fig. 141 – Switch on the Power
Supply
Open the door.
To unlock the door, use your authorized 24h locking
medium (locking medium without temporal limitations).
After you have opened the door, disconnect the connection
between the reader module and the Emergency Power
Supply.
Replace the batteries of the IES immediately after each
emergency opening (see page 97, Chapter "Replacing the
batteries of the IES").
Observe the notes and instructions in the Operating
Instructions of the Emergency Power Supply.
Page 104 of 128
Insert the three-pole
plug of the
Emergency Power
Supply into the three-
pole socket in the
outside shield of the
IES.
Switch on the
Emergency Power
Supply.
The On/Off switch is on
the back of the
Emergency Power Supply.
OMEGA ACTIVE IES
Advertisement
Table of Contents
