Table of Contents
Advertisement
Fitting
Observe the following drawing for correct assembly:
Fig. 15 - Position the silicone bearing correctly
In a uncoupled state, you can move the handle
up and down.
In a coupled state, you can only move the
handle down.
Make sure not to damage the connection
cables fixed to the IES.
Page 40 of 128
NOTICE
Always pull off the outside shield slowly and
carefully.
Avoid all mechanical stress of the connection
cables.
Avoid squeezing the connection cables.
Check the connection cables for mechanical
damage.
OMEGA ACTIVE IES
Advertisement
Table of Contents
