CEStronics OMEGA ACTIVE IES Fitting And Operating Instructions page 42

Fitting
16 Locking cylinder (not part of the scope of delivery)
17 Centring sleeve
18 Mortise lock (not part of the scope of delivery)
19 M6 fixing screw for handle
1.
Fig. 17 - Insert the spindle
The correct spindle must already be specified with the

order.
2.
Fig. 18 - Fasten the spindle
NOTICE

Malfunctions may occur if the hexagon socket head
screw is not inserted properly!
Always insert the hexagon socket head screw so that it

faces up.
Page 42 of 128
Select the spindle

appropriate for the
follower (hub).
Insert the spindle

into the follower of
the coupling unit.
Fasten the spindle

with the hexagon
socket head screw.
Use the 2 mm

hexagon socket head
key supplied for
fastening the spindle.
OMEGA ACTIVE IES