CEStronics OMEGA ACTIVE IES Fitting And Operating Instructions page 77

18 1 x crossbar
19 2 x lever arm
20 1 x inside shield
21 1 x countersunk screw M3 x 10 mm
22 2 x batteries, size AA, 3.6 V, lithium
23 2 x fastening screws for inside mounting M3 × 6 mm
24 2 x fastening screws for inside mounting, wooden or
sheet metal screw depending on door
25 1 x Inside plate with electronics module and battery
compartment
26 1 x spacer plate for inside
1.
Fig. 97 - Insert the spindle
The correct spindle must already be specified with the

order.
2.
Fig. 98 - Fasten the spindle
OMEGA ACTIVE IES
Select the spindle

appropriate for the
follower (hub, see
pages 37 and 36).
Insert the spindle

into the follower of
the coupling unit.
Fasten the spindle

with the hexagon
socket head screw.
Use the 2 mm

hexagon socket
head key supplied
for fastening the
spindle.
Page 77 of 128
Fitting