CEStronics OMEGA ACTIVE IES Fitting And Operating Instructions page 53

1.
Fig. 42 - Remove your existing
door fitting
2.
Fig. 43 - Insert the spindle
The correct spindle must already be specified with the

order.
3.
Fig. 44 - Fasten the spindle
OMEGA ACTIVE IES
Remove any

existing
escutcheons and
handles.
Select the spindle

appropriate for the
follower (hub).
Check that your

square has the right
length.
Insert the spindle

into the follower of
the coupling unit.
Fasten the spindle

with the hexagon
socket head screw.
Use the 2 mm

hexagon socket
head key supplied
for fastening the
spindle.
Page 53 of 128
Fitting