Table of Contents
Advertisement
Fitting
14.
Fig. 83 - Push the square through
the door lock
15.
Fig. 84 - Guide the cables
16.
Fig. 85 - Fasten the inside
fastening plate
Page 70 of 128
Push the square of the
outside shield through
the door lock.
Push the outside
shield on to the door.
Secure the outside
shield against sliding
off.
Guide the cable
through the opening
in the interior plate as
shown in the
illustration.
Satisfy yourself that
the cable is not
damaged.
Fasten the inside
fastening plate with
the screws
appropriate for the
thickness of your door
as shown in the
figure.
Refer to the table on
page 37 to select the
right screws.
Tighten the screws
leaving enough play
so that you can still
align the fitting.
OMEGA ACTIVE IES
Advertisement
Table of Contents
