1.
Fig. 70 - Remove your existing
door fitting
2.
Fig. 71 - Insert the spindle
The correct spindle must already be specified with
the order.
3.
Fig. 72 - Fasten the spindle
OMEGA ACTIVE IES
Remove any existing
escutcheons and
handles.
Select the spindle
appropriate for the
follower (hub).
Check that your square
has the right length.
Insert the spindle into
the follower of the
coupling unit.
Fasten the spindle with
the hexagon socket
head screw.
Use the 2 mm hexagon
socket head key
supplied for fastening
the spindle.
Page 65 of 128
Fitting