Table of Contents
Advertisement
Fitting
8.
Fig. 77 - Lay the cables
9.
Fig. 78 - Tighten the screw of the
handle
10.
Fig. 79 - Guide the cables
Page 68 of 128
Lay the cables along
the side of the
coupling as shown.
Satisfy yourself that
the cables are not
squeezed or
damaged.
Fix the cables e.g.
with adhesive tape to
make the handling
easier.
Tighten the hexagon
socket head screw of
the handle of the
inside shield with the
3 mm hexagon
socket head key.
Guide the cables from
the outside shield
through the cut-out in
the outside fastening
plate as shown in the
figure.
OMEGA ACTIVE IES
Advertisement
Table of Contents
