Table of Contents
Advertisement
Fitting
17.
Fig. 114 - Lay the cables
18.
Fig. 115 - Fit the exterior
mounting
NOTICE
Malfunctions may occur if the connection cable is
squeezed!
Ensure that the connecting cable is guided through
the fastening bore without being damaged.
Be sure that the connection cable is not squeezed
when you mount the outside shield.
Page 84 of 128
Lay the cables along
the side of the
coupling as shown.
Satisfy yourself that
the cables are not
squeezed or
damaged.
Fix the cables e.g.
with adhesive tape to
make the handling
easier.
Push the outside
shield on to the door.
Carefully guide the
connecting cable (2)
through the lower
fastening bore (1).
OMEGA ACTIVE IES
Advertisement
Table of Contents
