22.
Fig. 38 - Place the shield
23.
Fig. 39 - Fasten the shield
24.
Fig. 40 - Tighten the screw
This completes the fitting of the IES.
OMEGA ACTIVE IES
Place the inside
shield on the inside
plate.
The inside shield is
locked when you
hear a distinct click.
Fasten the inside
shield and the
outside shield with
one M3 screw (1)
each at the bottom.
Tighten the hexagon
socket head screw of
the handle of the
inside shield with the
3 mm hexagon
socket head key.
Page 51 of 128
Fitting