Table of Contents
Advertisement
Fitting
8.
Fig. 49 - Lay the cables
9.
Fig. 50 - Tighten the screw of the
handle
10.
Fig. 51 - Press the press-in nuts
Page 56 of 128
Lay the cables along
the side of the
coupling as shown.
Satisfy yourself that
the cables are not
squeezed or
damaged.
Fix the cables e.g.
with adhesive tape to
make the handling
easier.
Tighten the hexagon
socket head screw of
the handle of the
inside shield with the
3 mm hexagon socket
head key.
Press the three press-
in nuts with a suitable
press-in tool into the
outside fastening
plate.
Use the three holes
provided as shown in
the figure.
OMEGA ACTIVE IES
Advertisement
Table of Contents
