Table of Contents
Advertisement
Fitting
16.
Fig. 32 - Feed the connection
cable
If the ESD cover (3) is removed, this may
cause malfunctions of and/or damage to the
IES.
Do not remove the ESD cover of the electronic
unit (3).
17.
Fig. 33 - Mount the inside plate
Page 48 of 128
NOTICE
Feed the connection
cables (1, 2) through
the relief in the
inside plate.
Only plug it in after
the inside plate has
been secured (No.
22).
Slip the inside plate
on the spindle and
over the cylinder.
Properly align the
inside plate.
OMEGA ACTIVE IES
Advertisement
Table of Contents
