Table of Contents
Advertisement
Fitting
7.
Fig. 103 - Tighten the screw of the
handle
Now make the bore holes in the door for the mounting and the
push bar:
8.
Fig. 104 - Place the drilling
template
9.
Fig. 105 - Mark the holes
Page 80 of 128
Tighten the
hexagon socket
head screw of the
handle of the
inside shield with
the 3 mm hexagon
socket head key.
Place the supplied
drilling template over
the spindle.
Align the template
accurately.
Ensure parallel
alignment of the
measuring scale on
the template.
Mark the holes for the
fixing screws with an
awl on both sides of
the door.
Now transfer the
dimensions for the
push bar bore holes.
OMEGA ACTIVE IES
Advertisement
Table of Contents
