Removing And Installing Vacuum Line With Vacuum Sender G608 , Right-Hand Drive Model - Volkswagen Touareg 2010 Workshop Manual

6.3 Removing and installing vacuum line
with vacuum sender -G608- , right-hand
drive model
– Open clamp -1- and remove suction line.
– Pull off engine compartment seal in vicinity of brake servo.
– Remove right plenum chamber cover ⇒ General body repairs,
exterior; Rep. gr. 50 ; Plenum chamber cover .
– Remove bolts -arrows- for coolant expansion tank -1-.
– Slide coolant expansion tank -1- in -direction of arrow- out of
retainer.
– Place coolant expansion tank -1- to one side.
Note
Do not pull off coolant hoses.
– Remove nuts -arrows- and remove bracket -1-.
– Place bracket -1- with lines to one side.
– Remove star disc -arrow B-.
– Unclip coolant hose -1- from retainer -arrow A-.
– Remove right plenum chamber bulkhead ⇒ General body re‐
pairs, exterior; Rep. gr. 50 ; Plenum chamber bulkhead .
Touareg 2010 ➤
Brake systems - Edition 05.2011
6. Brake servo vacuum supply
85