Siemens SINUMERIK 840D sl Operating Manual page 195

Displaying/hiding a multi-channel view
...
Universal
Operating Manual, 01/2015, 6FC5398-6AP40-5BA2
8.2 Multi-channel view in the "Machine" operating area
1. Select the "Machine" operating area
2. Select the "JOG", "MDA" or "AUTO" mode.
3. Press the menu forward key and the "Settings" softkey.
4. Press the "Multi-channel view" softkey.
5. In the window "Settings for Multi-Channel View" in the selection
box "View", select the required entry (e.g. "2 channels") and de-
fine the channels as well as the sequence in which they are to be
displayed.
In the basic screen for the "AUTO", "MDA" and JOG" operating
modes, the upper window of the left-hand and right-hand channel
columns are occupied by the actual value window.
6. Press the "T,F,S" softkey if you wish to view the "T,F,S" window.
The "T,F,S" window is displayed in the lower window of the left-
hand and right-hand channel column.
Note:
The "T,F,S" softkey is present only for smaller operator panels,
i.e. up to OP012.
Multi-channel view (only 840D sl)
195