Execution From External Storage (Ees) - Siemens SINUMERIK 840D sl Operating Manual

Managing programs

11.15 Execution from External Storage (EES)

11.15 Execution from External Storage (EES)
11.15.1 Overview
The "Execution from external storage" function allows you to directly execute any size of part
program from an external drive (e.g. local drive or network drive).
You have the option of processing the G code programs saved on the configured external
drives as usual in the editor.
When executing the G code programs, as usual you obtain an actual block display of the
program blocks presently being executed; you also have the option of directly processing the
programs here in the reset state. In addition to the actual block display, you can also access
the basis block display. You can also make corrections using the "Program correction"
function.
292
Machine manufacturer
Processing EXTCALL calls can be enabled and disabled.
Please refer to the machine manufacturer's specifications.
Software option
You require the "Execution from External Storage (EES)" software option in order
to use this function.
Machine manufacturer
Please refer to the machine manufacturer's instructions.
Operating Manual, 01/2015, 6FC5398-6AP40-5BA2
Universal