Creating A Program List - Siemens SINUMERIK 840D sl Operating Manual

Managing programs
11.4 Creating a directory/program/job list/program list
Template
You can select a template from Siemens or the machine manufacturer when creating a new
job list.
Executing a workpiece
If the "Select" softkey is selected for a workpiece, the syntax of the associated job list is
checked and then executed. The cursor can also be placed on the job list for selection.
Procedure
11.4.6

Creating a program list

You can also enter programs in a program list that are then selected and executed from the
PLC.
The program list may contain up to 100 entries.
Procedure
270
1. Select the "Program manager" operating area.
2. Press the "NC" softkey, and in directory "Workpieces" place the cursor
on the program for which you wish to create a job list.
3. Press the "New" and "Any" softkeys.
The "Any New Program" window opens.
4. Select entry "Job list JOB" from the "Type" selection field and enter a
name and press the "OK" softkey.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1. Select the "Program manager" operating area.
Operating Manual, 01/2015, 6FC5398-6AP40-5BA2
Universal