Displaying Measured Curves - Siemens SINUMERIK 840D sl Operating Manual

Ctrl-Energy

14.4 Displaying measured curves

14.4 Displaying measured curves
You can display current or saved measurement curves graphically or as detailed tables.
Display
Start of the measurement
Duration of the measure-
ment [s]
Device
Supplied energy [kWh]
Regenerated energy
[kWh]
Energy totals [kWh]
Display in the "Ctrl-E Analysis" window.
Procedure
332
Meaning
Shows the time at which the measurement was started by pressing the
"Start measurement" softkey.
Shows the measurement duration in seconds until the "Stop measure-
ment" softkey is pressed.
Displays the selected measured component.
Manually
•
Total, drives
•
Total, machine
•
Shows the supplied energy of the selected measured component in kilo-
watts per hour.
Shows the regenerated energy of the selected measured component in
kilowatts per hour.
Shows the total of all measured drive values or the total of all axes as
well as fixed value and Sentron PAC.
1. The "Ctrl-E Analysis" window is open and you have already performed
and saved measurements.
2. Press the "Graphic" and "Saved measurements" softkeys.
The measurement curves are displayed in the "Ctrl-E Analysis" window.
3. Press the "Saved measurements" softkey again if you only want to see
the actual measurement.
4. Press the "Details" softkey to display the exact measurement data and
consumption values of the last three saved measurements and possibly
a current measurement.
Operating Manual, 01/2015, 6FC5398-6AP40-5BA2
Universal