Siemens SINUMERIK 840D sl Operating Manual page 343

Examples:
1234,400
1000-2000
100,200-300
Requirement
● The user profile window is opened.
● You selected the event "Measuring cycle messages for tools", "Measuring cycle
messages for workpieces", "Sinumerik messages/alarms (errors when executing)",
"Machine faults" or "Maintenance intervals".
Editing events
Universal
Operating Manual, 01/2015, 6FC5398-6AP40-5BA2
1. Activate the required check box and press the "Details" softkey.
The appropriate window opens (e.g. "Measuring cycle messages for
workpieces") and shows a list of the defined alarm numbers.
2. Select the corresponding entry and press the "Delete" softkey to re-
move the alarm number from the list.
- OR -
Then press the "New" softkey if you wish to create a new entry.
The "Create new entry" window opens.
Enter the data and press the "OK" softkey to add the entry to the list.
Press the "Save" softkey to save the settings for the result.
3. Press the "Standard" softkey to return to the standard settings for the
events.
Easy Message (828D only)
15.4 Setting-up events
343