Siemens SINUMERIK 840D sl Operating Manual page 125

Note
The buffer memory contents are retained even after the editor is closed, enabling you to
paste the contents in another program.
Note
Copy/cut current line
To copy and cut the current line where the cursor is positioned, it is not necessary to mark or
select it. You have the option of making the "Cut" softkey only operable for marked program
sections via editor settings.
See also
Opening additional programs (Page 129)
Editor settings (Page 130)
Universal
Operating Manual, 01/2015, 6FC5398-6AP40-5BA2
• When creating a new program, the first line is allocated the "first
block number".
• If, up until now, the program had no N number, then the program
block inserted is allocated the starting block number defined in the
"First block number" input field.
• If N numbers already exist before and after the insertion point of a
new program block, then the N number before the insertion point is
incremented by 1.
• If there are no N numbers before or after the insertion point, then the
maximum N number in the program is increased by the "increment"
defined in the settings.
Note:
After exiting the program, you have the option of renumbering the pro-
gram blocks.
Machining the workpiece
5.10 Editing a program
125