Calling The Input Screen - Siemens SINUMERIK 840D sl Operating Manual

Creating a G code program
7.6 Blank input
7.6.2

Calling the input screen

Procedure
7.6.3 Blank input
Parameter Description
Data for Selection of the spindle for blank
Main spindle
•
Counterspindle
•
Note:
If the machine does not have a counterspindle, then the entry field "Data for" is not appli-
cable.
Clamping Selecting the clamping location of the blank
Table
•
All clampings are mounted on a table
Note: No turning cycles can be used in the program with the "Table" selection.
C1...
•
All clampings are mounted on a rotary axis
Note: please refer to the machine manufacturer's specifications.
Blank Selecting the blank
Cuboid
•
Tube
•
Cylinder
•
Polygon
•
Centered cuboid
•
Delete
•
X0 1. Rectangular point X - (only for cuboid)
190
1. Select the "Program" operating area.
2. Press the "Misc." and "Blank" softkeys.
The "Blank Input" window opens.
Operating Manual, 01/2015, 6FC5398-6AP40-5BA2
Unit
Universal