Siemens SINUMERIK 840D sl Operating Manual page 38

Introduction
2.4 Operator interface
Maximize display
Display overview
Display
Header columns
Work/Machine
Position
Display of distance-to-go
Feed/override
Repos offset
Collision monitoring
(only 840D sl)
Footer
See also
Zero offsets (Page 73)
38
Press the ">>" and "Zoom act. val." softkeys.
Meaning
Display of axes in selected coordinate system.
Position of displayed axes.
The distance-to-go for the current NC block is displayed while the
program is running.
The feed acting on the axes, as well as the override, are displayed
in the full-screen version.
The distances traversed in manual mode are displayed.
This information is only displayed when you are in the "Repos"
submode.
Display of active work offsets and transformations.
The T, F, S values are also displayed in the full-screen version.
Collision avoidance is activated for the JOG and MDA or
AUTOMATIC modes.
Note:
The $MN_JOG_MODE_MASK machine data can be set
to suppress the display of the symbol.
Please refer to the machine manufacturer's specifica-
tions.
Collision avoidance is deactivated for the JOG and MDA
or AUTOMATIC modes.
Operating Manual, 01/2015, 6FC5398-6AP40-5BA2
Universal