Siemens SINUMERIK 840D sl Operating Manual page 251

Procedure
...
...
Universal
Operating Manual, 01/2015, 6FC5398-6AP40-5BA2
1. Select the "Parameter" operating area.
2. Press the "Tool list", "Tool wear" or "Magazine" softkey.
3. Press the ">>" and "Search" softkeys.
4. Press the "Tool" softkey if you wish to search for a specific tool.
- OR -
Press the "Magazine location" softkey if you wish to search for a specif-
ic magazine location or a specific magazine.
- OR -
Press the "Empty location" softkey if you wish to search for a specific
empty location.
10.13 Specific search in the tool management lists
Tool management
251