Siemens SINUMERIK 840D sl Operating Manual page 26

Introduction
2.2 Operator panel fronts
26
<SHIFT> + <ALT> + <D>
Backs up the log files on the USB-FlashDrive. If a USB-FlashDrive
is not inserted, then the files are backed-up in the manufacturer's
area of the CF card.
<SHIFT> + <ALT> + <T>
Starts "HMI Trace".
<SHIFT> + <ALT> + <T>
Exits "HMI Trace".
<ALT> + <S>
Opens the editor to enter Asian characters.
<ALT> + <Cursor up>
Moves the block start or block end up in the editor.
<ALT> + <Cursor down>
Moves the block start or block end down in the editor.
<DEL>
• Editing box
Deletes the first character to the right of the cursor.
• Navigation
Deletes all characters.
<DEL> + <CTRL>
• Editing box
Deletes the first word to the right of the cursor.
• Navigation
Deletes all characters.
<Spacebar>
• Editing box
Inserts a space.
• Switches between several specified options in selection lists and
in selection boxes.
<Plus>
• Opens a directory which contains the element.
• Increases the size of the graphic view for simulation and traces.
Operating Manual, 01/2015, 6FC5398-6AP40-5BA2
Universal