Siemens SINUMERIK 840D sl Operating Manual page 300

Managing programs
11.17 Setup data
Procedure
...
Note
Program selection
If a main program as well as an INI file with the same name are in a directory, when
selecting the main program, initially, the INI file is automatically started. In this way,
unwanted tool data can be changed.
300
1. Select the "Program Manager" operating area.
2. Position the cursor on the program whose tool and zero point
data you wish to back up.
3. Press the ">>" and "Archive" softkeys.
4. Press the "Setup data" softkey.
The "Backup setup data" window opens.
5. Select the data you want to back up.
6. When required, change the specified name of the originally se-
lected program here in the "File name" field.
7. Press the "OK" softkey.
The setup data will be set up in the same directory in which the
selected program is stored.
The file is automatically saved as INI file.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Operating Manual, 01/2015, 6FC5398-6AP40-5BA2
Universal