Siemens SINUMERIK 840D sl Operating Manual page 55

Procedure
Editing characters using the keyboard
+
Editing characters using a matrix
+
Universal
Operating Manual, 01/2015, 6FC5398-6AP40-5BA2
1. Open the screen form and position the cursor on the input field.
Press the <Alt +S> keys.
The editor is displayed.
2. Switch to the "Keyboard - Matrix" selection box.
3. Select the keyboard.
4. Switch to the function selection box.
5. Select Korean character input.
6. Enter the required characters.
7. Press the <input> key to enter the character into the input field.
1. Open the screen form and position the cursor on the input field.
Press the <Alt +S> keys.
The editor is displayed.
2. Switch to the "Keyboard - Matrix" selection box.
3. Select the "matrix".
4. Switch to the function selection box.
5. Select Korean character input.
Introduction
2.4 Operator interface
55