G Functions For Mold Making - Siemens SINUMERIK 840D sl Operating Manual

Machining the workpiece
5.12 Display G and auxiliary functions
5.12.3

G functions for mold making

In the window "G functions", important information for machining free-form surfaces can be
displayed using the "High Speed Settings" function (CYCLE832).
High-speed cutting information
In addition to the information that is provided in the "All G functions" window, the following
programmed values of the following specific information is also displayed:
● CTOL
● OTOL
● STOLF
The tolerances for G0 are only displayed if they are active.
Particularly important G groups are highlighted.
You have the option to configure which G functions are highlighted.
References
● Additional information is available in the following references:
Function Manual, Basic Functions; Chapter, "Contour/orientation tolerance"
● For information about configuring the displayed G groups, refer to the following
document:
Commissioning Manual SINUMERIK Operate (IM9) / SINUMERIK 840D sl
Procedure
144
Software option
You require the "Advanced Surface" software option in order to use this function.
1. Select the "Machine" operating area
2. Press the <JOG>, <MDI> or <AUTO> key.
Operating Manual, 01/2015, 6FC5398-6AP40-5BA2
Universal