Siemens SINUMERIK 840D sl Operating Manual page 283

Specifications for USB
Entry
Device
Connection
Symbolic
Additional parameters under Details
Partition
USB path
Specifications for local drives
Entry
Symbolic
Additional parameters under Details
Use drive as:
Universal
Operating Manual, 01/2015, 6FC5398-6AP40-5BA2
Front
X203/X204
X204
X212/X213
X20
X60.P1/P2/P3/P4
LOCAL_DRIVE
CF_CARD
SYS_DRIVE
Managing programs
11.12 Set up drives
Description
Names of the TCU to which the USB storage
medium is connected, e.g. tcu1. The NCU
must already know the TCU name.
USB interface that is located at the front of
the operator panel.
USB interface X203/X204 that is located at
the rear of the operator panel.
For SIMATIC Thin Client the USB interface is
X204.
TCU20.2/20.3
OP 08T
PCU
Symbolic drive name.
Partition number on the USB storage medi-
um, e.g. 1 or all.
If a USB hub is being used, then specify the
USB port of the hub.
Path to the USB hub.
Note:
This value is not currently evaluated.
Description
Symbolic drive name.
Assignment of the names under Details
The activation of the checkbox assigns the
symbolic name to the drive.
If an assignment exists already for the drive,
no change can be made.
All checkboxes are active as preassignment.
283