Replacing Program Text - Siemens SINUMERIK 840D sl Operating Manual

Machining the workpiece
5.10 Editing a program
Further search options
Softkey
5.10.2

Replacing program text

You can find and replace text in one step.
Precondition
The desired program is opened in the editor.
Procedure
122
If the text you are searching for is found, the corresponding line is high-
lighted.
6. Press the "Continue search" softkey if the text located during the search
does not correspond to the point you are looking for.
- OR -
Press the "Cancel" softkey when you want to cancel the search.
Function
The cursor is set to the first character in the program.
The cursor is set to the last character in the program.
1. Press the "Search" softkey.
A new vertical softkey bar appears.
2. Press the "Find and replace" softkey.
The "Find and Replace" window appears.
3. In the "Text" field, enter the term you are looking for and in the "Replace
with" field, enter the text you would like to insert automatically during the
search.
4. Position the cursor in the "Direction" field and choose the search direc-
tion (forward, backward) with the <SELECT> key.
5. Press the "OK" softkey to start the search.
If the text you are searching for is found, the corresponding line is high-
lighted.
Operating Manual, 01/2015, 6FC5398-6AP40-5BA2
Universal