Monitoring Data - Siemens SINUMERIK 840D sl Operating Manual

Tool management
10.9 Tool details
10.9.4

Monitoring data

The "Tool Details" window provides the following data on the selected tool when the
"Monitoring data" softkey is active.
Parameter
Magazine location
Tool name
ST
D quantity
D
Monitoring type
Tool life, count and wear
Tool life, count and wear
Tool life, count and wear
Monitoring OEM parame-
ters 1 - 8
246
Meaning
The magazine number is specified first, followed by the location number in the magazine. If
there is only one magazine, only the location number is displayed.
The tool is identified by the name and the sister tool number. You can enter the name as text
or number.
Sister tool number (for sister tool strategy)
Number of created cutting edges
Cutting edge number
T - tool life
C - count
W - wear
The wear monitoring is configured via machine data.
Please note the specifications of the machine manufacturer.
Actual value
Actual value for tool life, count or wear
Setpoint
Setpoint for tool life, count or wear
Prewarning limit
Specification of the tool life, the count or wear at which a warning is displayed.
Operating Manual, 01/2015, 6FC5398-6AP40-5BA2
Universal