Installation And Removal - Mitsubishi Electric WS0-CPU0 Operating Manual

4

Installation and removal

Note
Note
Installation and removal
4.1 System requirements
Recommended system configuration:
 Windows XP (32 Bit/64 Bit), Windows Vista (32 Bit/64 Bit), or Windows 7 (32 Bit/64
Bit)
 Microsoft .NET Framework 3.5
 1 GHz processor
 1 GB RAM
 1024 × 768 pixel screen resolution
 300 MB free hard disk memory
Setting and Monitoring Tool is a .NET Framework application. It requires .NET
Framework Version 3.5 or higher.
Information on the current .NET Framework versions, supported operating systems,
and Regional and Language Options settings is available on the Internet at
http://www.microsoft.com/
Microsoft .NET Framework Version 3.5 or higher and any other components that
may be needed can also be downloaded from http://www.microsoft.com/downloads/.
Use a standard user account or higher in Windows Vista or Windows 7.
To display text of Setting and Monitoring Tool in Chinese, use Chinese version of
Windows operating systems.
To display text of Setting and Monitoring Tool in Japanese or Chinese in Windows
XP (English version), add the language in the Regional and Language Options
dialog box. (The dialog box can be accessed from Control Panel.)
4.2 Installation and Update
For the acquisition of Setting and Monitoring Tool (including information for
installation), please contact your local Mitsubishi representative.
 Start the installation by running the setup.exe file and then follow the further
instruction.
New software versions may contain new functions and support new MELSEC-WS
modules. The version of the Setting and Monitoring Tool can be found in the Extras
menu under About.
Remove the old software version before installing a new one. The working directory
in which the project data are stored is not overwritten during the new installation and
is retained. When an RS232-USB converter (WS0-UC-232A) is used, install a driver
from the CD ROM provided with the converter.
When an RS232-USB configuration cable (WS0-C20M8U) is used, please contact
your local Mitsubishi representative for a driver of the cable.
Chapter 4
24