Chapter 9
Figure 116:
Parameter settings dialog
for the Fast shut off function
block
Note
Figure 117:
Output selection for Fast
shut off
141
Logic programming – Function blocks
Choose the number of inputs which you would like to attach to the function block.
Then click the Parameter tab and choose the zone by checking the boxes.
If only AND logic is needed, leave the Zone 2 AND function block inputs unchecked.
If additional OR logic is required in the application, the inputs can be combined
using the Zone 1 and Zone 2 AND function blocks and subsequently connecting to
the internal OR function block.
Finally select the output for Fast shut off.