Report View - Mitsubishi Electric WS0-CPU0 Operating Manual

Chapter 5
Figure 33:

Report view

Note
63
The graphical user interface
5.7 Report view
In the Report view, a comprehensive report on the current project and all
configuration settings including the logic program and detailed wiring information is
available. You can individually configure the contents of the report.
The information to be summarized in the report can be selected individually from an
expandable selection list on the left-hand side. The selection is made by activating or
deactivating the check boxes.
The toolbar in the Report view contains the following commands:
 Save: Stores the report in PDF format on a data medium.
 Print: Open the report in PDF format. To this purpose, a PDF viewer (e.g. Acrobat
Reader Ver.10.0 or later) must be installed on your computer.
 Refresh report: Updates the report after changing the report structure.
 Change report structure: Switches between a hardware oriented and a function
oriented report structure.
Detailed information on using the wiring information at the end of the report is
available in the Safety Controller User's Manual.
You will find example application reports in the annex of this manual (see Section 15.1).
Exercise for the Report view
 Open the Report view by clicking on the Report button.
 Use the Change report structure button to choose one of the two different report
structures (hardware- or function-oriented).
 Activate or deactivate the check boxes for the components that shall be included in
the report in the selection list on the left-hand side.
 After you have completed your selection, click Refresh report. The report is now
assembled and displayed in the right-hand window section.
How to save or print a report:
The report can be printed or saved as PDF.
 To save the report as PDF, click on the Save button.
 To print the report, click on the Print button. A PDF preview of the report will be
created that you can subsequently print.