External Dimensions And Part Names; Installation And Removal; (When The Expansion Board/Connector Conversion Adapter Is Not Used Together) - Mitsubishi Electric MELSEQ FX3S Series User Manual

FX Series Programmable Controllers
3S
User's Manual - Hardware Edition

16.1.3 External Dimensions and Part Names

[4]
[3]
[2]
[1]
[1] [OK] button
[2] [+] button
[3] [-] button
[4] [ESC] button
16.2

Installation and Removal

Be sure that the power is OFF when installing the display module.
16.2.1 Installation and Removal

(when the expansion board/connector conversion adapter is not used together)

The FX -30MT/ES is used as the main unit in this example.
3S
1
Remove the top cover.
Remove the top cover (A in the figure on the right) as
shown in the right figure.
2
Install/remove the display module.
Make sure the display module is in parallel with the main
unit. Attach the display module to the main unit as shown in
the right figure (arrow 2).
Remove the display module as shown in the right figure
(arrow 2').
[5]
35 (1.38")
Unit: mm (inches)
[6]
[7]
Cut off this part when
using an expansion board
at the same time.
9.6 (0.38")
12 (0.48")
[5] Display
[6] Connector for PLC
[7] Display module fixing hook
(When used together with an expansion board)
2
16 Display Module (FX3S-5DM)
16.2 Installation and Removal
A
1
2'
153
11
12
13
14
15
16
17
A
B
C