Mitsubishi Electric WS0-CPU0 Operating Manual page 76

Chapter 6
Note
Figure 44:
Create new profile dialog
(TCP/IP)
73
Connecting to the MELSEC-WS safety controller
How to add a TCP/IP profile:
To create a TCP/IP profile it is necessary that your MELSEC-WS safety controller
contains an Ethernet interface module (WS0-GETH) which must be configured with
a valid IP address for your network. For detailed instructions on the Ethernet
interface module configuration please see the Safety Controller Ethernet Interface
Module User's Manual.
 Click on the Add TCP/IP profile button. The Create new profile dialog is opened.