5
The graphical user interface
Note
Figure 1:
Start view with selection of
the action
The graphical user interface
This chapter familiarizes you with the basic elements of the graphical user interface as
an introduction. This chapter does not give any information on the configuration of
MELSEC-WS modules nor any instructions for logic programming. This chapter is only
intended to explain the fundamental functioning of the Setting and Monitoring Tool on
the basis of a small section of the functions. Experienced users of Setting and
Monitoring Tool can skip this chapter.
5.1
Start view
After the Setting and Monitoring Tool has been started, the start view is displayed. The
user can specify here with which of the following actions he wants to start:
Open existing project file
Connect to physical device
Create new project
Create new Flexi Link project
Edit com. Interface settings
5.2
Setting the desired language
Click the flag icon in the menu bar at the far right and select the desired language
version.
Chapter 5
26