Parameterization
8.6.3
Menu structure – Enhancement for FOUNDATION Fieldbus
Buttons
Menu item
„Data"
Display
„Step"
82
Buttons
Set parameter
„Enter"
1 large
1 small
„Enter" +
Zeile 1
„Enter"
Configurable
Buttons
parameters
Display format mode:
„Enter"
4 small_
1 large and one small line. 4 small lines.
Q operating mode:
Q Operating
This operating mode is dependent upon the flow
Mode
„Enter"
display in operating volume or standard volume/mass
units.
Q operation:
Qv Actual
„Step"
Displays the operating volume flow.
Displays the flow relative to Qmax.
Percent
„Step"
_
Displays the flow totalizer.
Totalizer
„Step"
_
This parameter will only be displayed if the flowmeter
Temperature
„Step"
sensor is fitted with a temperature measurement
_
device. Displays the process temperature.
Displays the sensor frequency.
Frequency
„Step"
_
Selects the values to be displayed. Displays the OUT
AI1 Out_
„Step"
value of AI1, decimal places resulting from the
_
decimal point in the OUT_SCALE structure. The unit
displayed is the UNIT_INDEX from the OUT_SCALE
structure.
Displays the actual mode of AI1 and the status of the
AI1 Status_
„Step"
output variables (OUT status).
_
Selects the values to be displayed. Displays the OUT
AI2 Out_
„Step"
value of AI2, decimal places resulting from the
_
decimal point in the OUT_SCALE structure. The unit
displayed is the UNIT_INDEX from the OUT_SCALE
structure.
Displays the actual mode of AI2 and the status of the
AI2 Status_
„Step"
output variables (OUT status).
_
FV4000 / FS4000
Comments
Important
The totalizer reading on the local display
corresponds to that on the totalizer in the
AI block only in the case of the
"FOUNDATION Fieldbus" design.
D184B097U02