Mounting
4.8
Centering the wafer design
Wafer units (FV4000-VT4/VR4 only) are centered via the outer diameter of the sensor body with
the corresponding bolts. Depending on the nominal pressure rating, sleeves for the bolts, a
centering ring (up to DN 80) or segments can be ordered as additional accessories.
Fig. 19: Centering the wafer unit with ring or segment
1 Centering
2 Bolts
28
3 Centering segment
FV4000 / FS4000
1
2
3
G00618
D184B097U02