Appendix - ABB FV4000 Operating Instruction

14 Appendix

14.1 Additional documents
• Data sheet (D184S035Uxx)
• Commissioning instructions (CI/FV4000/FS4000)
• Interface description for devices with HART communication (D184B108U03/04)
• Interface description for devices with PROFIBUS PA communication (D184B093U21/22)
• Interface description for devices with FOUNDATION Fieldbus communication
(D184B093U23/24)
14.2 Approvals and certifications
CE mark
Explosion
Protection
Important
All documentation, declarations of conformity, and certificates are available in ABB's download
area.
www.abb.com/flow
D184B097U02
The version of the meter in your possession meets the requirements of the
following European directives:
- ATEX directive 94/9/EC
- EMC directive 2004/108/EC
- Pressure equipment directive (PED) 97/23/EC
Pressure equipment does not receive a CE mark indicating PED compliance
on the factory tag in the event of the following conditions prevailing:
- The maximum permissible pressure (PS) is less than 0.5 bar
- Due to low pressure risks (meter size ≤ DN 25 / 1") no approval procedures
are required.
Identification for intended use in potentially explosive atmospheres according
to:
- ATEX directive (marking in addition to CE marking)
- IEC standards
- FM Approvals for Canada and United States
c us
FV4000 / FS4000
Appendix
115