ABB FV4000 Operating Instruction page 81

Buttons Menu item
„Data" PROFIBUS PA
„Step"
TRIO-WIRL PA
„Data"
50VT4 PA 11/2001
„Step"
D200F003U01 A.1_
D184B097U02
Buttons Set parameter
Software Rev
„Enter"
Communication:
0
IdentNr Selector
„Data"
Triowirl 05DC
„Step"
2*AI+TOT
AI1 Channel
„Data"
Qv
„Step"
AI2 Channel
„Data"
Qv
„Step"
TOT Channel
„Data"
Qv
„Step"
Configurable
Buttons
parameters
Displays the communication software version.
Sets the ID no. for the selector.
Note:
Modes can only be changed when in STOP and not
during cyclic communication.
IdentNr Selector
„Enter"
Channel setting of the first AI block. When setting the
Profile 9740
channel, the unit for the channel is also copied to the
AI+TOT
AI block (to OUT_SCALE.UNIT_INDEX).
IdentNr Selector
„Enter"
Profile 9700
AI
„Enter" AI1 Channel
Qoper. mode
AI1 Channel
„Enter"
Temperature
AI1 Channel
„Enter"
Frequency
AI1 Channel
„Enter"
int. Total.
Channel setting of the second AI block. Selection and
„Enter" AI2 Channel
description as first AI block.
Qoper. mode
Channel setting for totalizer block.
TOT Channel
„Enter"
Qoper. mode
Displays the current software version along with the
revision date.
FV4000 / FS4000
Parameterization
Comments
81