Menu Structure – Enhancement For Profibus Pa - ABB FV4000 Operating Instruction

8.6.2 Menu structure – Enhancement for PROFIBUS PA
Buttons Menu item
„Data" Display
„Step"
D184B097U02
Buttons Set parameter
„Enter"
1 large
1 small
„Enter" +
Zeile 1
„Enter"
Configurable
Buttons
parameters
Display format mode:
„Enter" 4 small_
1 large and one small line. 4 small lines.
Q operating mode:
Q Operating
This operating mode is dependent upon the flow
Mode
„Enter"
display in operating volume or standard volume/mass
units.
Q operation:
Qv Actual
„Step"
Displays the operating volume flow.
Displays the flow relative to Qmax.
Percent
„Step"
_
Displays the flow totalizer.
Totalizer
„Step"
_
This parameter will only be displayed if the flowmeter
Temperature
„Step" sensor is fitted with a temperature measurement
_
device. Displays the process temperature.
Displays the sensor frequency.
Frequency
„Step"
_
Selects the values to be displayed. Displays the OUT
AI1 Out_
„Step"
value of AI1, decimal places resulting from the
_
decimal point in the OUT_SCALE structure. The unit
displayed is the UNIT_INDEX from the OUT_SCALE
structure.
Displays the actual mode of AI1 and the status of the
AI1 Status_
„Step"
output variables (OUT status).
_
Selects the values to be displayed. Displays the OUT
AI2 Out_
„Step"
value of AI2, decimal places resulting from the
_
decimal point in the OUT_SCALE structure. The unit
displayed is the UNIT_INDEX from the OUT_SCALE
structure.
Displays the actual mode of AI2 and the status of the
AI2 Status_
„Step"
output variables (OUT status).
_
FV4000 / FS4000
Parameterization
Comments
Important
The totalizer reading on the local display
corresponds to that on the totalizer in the
AI block only in the case of the
"FOUNDATION Fieldbus" design.
79