ABB FV4000 Operating Instruction page 76

Parameterization
Buttons Menu item
„Data" Function
„Step" test
76
Buttons Set parameter
„Enter"
Iout
„Data" Q Simu-
„Step" lation
„Data" Main
„Step" FRAM
„Data" Backup
„Step" FRAM
Contact
„Data"
output
„Step"
Pulse
„Data"
output
„Step"
Configurable
Buttons Comments
parameters
„Enter" Manually controlled test of current output.
0
(100 % = 20 mA)
%
„Enter" 0.0 Selection: 0 ... 2500 Hz sensor frequency
Hz Simulation (current and pulse output). Switch on by
entering the starting value in "Hz". Switch off by
entering "0" Hz. On changing to the process display,
the frequency can be modified with the "Data" and
"Step" buttons (± 5 Hz).
Contact The contact is switched on or off as required with the
„Enter"
"Data" and "Step" buttons.
off
„Enter" 4Hz Rate Selection:
on 0 = pulses
1 = no pulse
FV4000 / FS4000 D184B097U02