Menu Structure; Selection And Input; Start Menu; Selection - ABB AW101 Instruction Manual

Water Hardness Analyzer
AW101 Testomat

5 Menu Structure

Displayed Function
‘I’

Information Menu

Fig. 5.1 Menu Structure

5.1 Selection and Input

5.1.1 Start Menu

Select one of the two menus by pressing the M or the i key.

5.2 Selection

The active line position is displayed in CAPITALS. Using the
ENTER key, the line is activated to enter a submenu. Using the
 key, the next parameter appears below the lowest display
line; in this way you scroll through the menu.

5.3 Entry Function (M menu only)

The entry functions are:

Select a programming step using the   keys and
activate the entry function by pressing the ENTER key.

In the case of digits to be entered, the first digit to be
modified flashes. Change a value using the   keys.

Use the keys to confirm an entry and simultaneously
change to the next or the preceding digit (the entry to be
changed starts flashing).

Terminate the entry function by pressing ENTER. The
following line is activated.

To go up one level of the menu press the M key.

5.4 End Menu

To go up one level of the menu press the M or i key.
After returning from the highest menu level the unit is again in
display mode.
IM/AW101 Rev. C
(Key)
‘M’
Program Menu
5.5 Information Menu
2 lines are displayed
°
<0.05 dH
1
1:0.20 2:0.40
OPERATING VALUES
2
Program values
Reag. level 30%
3
Version
4
Mode of operat.
Interval
Type of reagent
Display of unit
Limit values
E
Flush time
Water meter
4a
Type TH2005
Type TH2025
Type TH2100
Type TH2250
Type TH2025
0.05 - 0.50 dH
Fig. 5.2 The Information Menu Structure
The information menu calls-up the active settings and status of
the unit – see Fig. 5.2
a
Call
Press the i key to open the information menu.
b
Operating values:
– Display of current values
– Reagent level
– Software version.
c
Program values.
d
Press the arrow keys to call up the menu item Program
values. Press ENTER to open the list with the set values.
The active setting of a parameter can be queried by
pressing ENTER:
For example:
i  INFORMATION  PROGRAM VALUES  TYPE OF
REAGENT
The selected function is marked by a star (in this context
there are no active lines).
5 Menu Structure
(black scale)
i-button
39Bxxx
E
°
11